If you have a file like a photo, video or document on your Android phone that you want to share with someone else that happens to be physically next to you, there’s a simple way to accomplish this task. It’s called Android Beam, and the feature works pretty much how its title suggests.
With this simple tech, you can ‘beam’ files to your friends and family, though both phones involved in the transfer must have NFC (Near-Field Communication) hardware for it to work.
Android Beam Background Info. For most devices, there are actually two different ways that you can use Android Beam. First is the 'Touch to Beam' feature—when viewing a compatible link or file on one device, you can simply touch the back of the phone to the back of another device, then tap your screen to beam the content over.
Android Beam itself has been part of the Android OS since version 4.0 (Ice Cream Sandwich) launched, so it’s more than likely that your smartphone or tablet has that version, or higher, of the OS installed. However, your device may not have NFC hardware, or if it does, it may be turned off by your specific wireless carrier. You need to make sure your device has working NFC support, along with your friend’s phone, for Android Beam transfers to work.
Thankfully, it’s pretty easy to check for these features. Just go into your phone or tablet’s Settings and then tap “More” in the Wireless & Networks selection. If NFC is enabled you should see a slider that can turn it on or off on your phone. If you want to make sure Android Beam is working, you can also go to its specific feature in the Settings menu as well and turn it on or off.
You should then be ready to transfer some files with your friend’s phone (again, if he or she also has Android Beam and NFC support).
Assuming both Android Beam and NFC are now set up on both phones, the transfer process for files can begin. All you and your friend have to do is to place those devices back to back against each other. Then you check out if the content you want to transfer to the other phone is on your screen. If it can be moved to the other phone, you should see a “Touch to Beam” caption on top.
Then all you have to do is just touch the screen and that content, such as a photo, video or word document, will quickly transfer from your phone to the other device, using NFC and a Bluetooth connection. You should get a confirmation sound if the transfer was completed successfully, and there will be a more negative sound if the transfer has failed for some reason.
Keep in mind that the transfer between the two devices is just one way; if your friend wants to move a piece of content to your phone, he or she must make their own Android Beam connection to your device and repeat the same steps you just did.
There is another similar technology that was enabled for a few older Samsung smartphones, such as the Galaxy S III and Galaxy Note 2, a few years ago. It’s called S Beam, and unlike Android Beam, it used the NFC hardware in those phones to establish a transfer of files via a Wi-Fi Direct connection, instead of Bluetooth. This technology was supposed to be faster than Android Beam for moving files. Otherwise, it transfered content in exactly the same way as Google’s method. Since only a few older Samsung smartphones and tablets used S Beam, it’s highly unlikely your phone supports this technology.
While there are plenty of other methods for phone owners to transfer pictures, videos and other content to anyone else they want (messaging, cloud servers, etc), there is still something kind of cool, even futuristic, about just touching two phones together, back to back, to make that transfer happen. That’s just what Android Beam does.
If you have used Android Beam in the past, did you feel it worked as expected? Did you have any issues with the feature? Let us know in the comments!
One of the powerful and strongest apps on the app store is Laser Beam Pro for Mac which is holding the average rating of 3.2. This Laser Beam Pro provides the current version 1.3 for Mac to install on your device. The installation number of the Laser Beam Pro is 5,000+ This number proves how much favorable the Laser Beam Pro is among the users.
When it comes to use the best app on your Mac device, you can choose Laser Beam Pro with the average rating of 3.2 The Laser Beam Pro is on the and offered by Google Commerce Ltd The Laser Beam Pro is developed by http://www.cremotech.co.kr/ and this company is holding the strongest position on the industry.
Contents
By reading this table you will get an overall idea of the Laser Beam Pro. Also, this table will show you, either your Mac device is capable of installing the Laser Beam Pro on Mac or not.
| App Specification | |
|---|---|
| Name of Product: | February 5, 2018 For Mac |
| Name of the Author: | Google Commerce Ltd |
| Product Version: | 1.3 |
| License: | Freeware |
| Product Categories: | |
| Supporting Operating Systems for Product: | Windows,7,8,10 & Mac |
| Os type for Installing Product App: | (32 Bit, 64 Bit) |
| Languages: | Multiple languages |
| File size: | 1.6M |
| Installs: | 5,000+ |
| Requires Android: | 5.0 and up |
| Developer Website of Product: | http://www.cremotech.co.kr/ |
| Updated Date: | February 5, 2018 |
As the Laser Beam Pro is offered by Google Commerce Ltd and requires android version of 5.0 and up, so basically you can install this app on your android device. But those who are the owner of Mac devices and want to use the android app like Laser Beam Pro they need to install an emulator software at first.
An emulator software like Bluestacks, MEmu, etc. will help you to install the Laser Beam Pro on your Mac device. The last update date of the Laser Beam Pro was February 5, 2018 and the version is 1.3. How to cut on mac keyboard. Let’s explore the process of setting up the Laser Beam Pro with the assistance of an emulator software.
To set up Laser Beam Pro on Mac with the most leading emulator software Bluestacks, at first check the requirement of the android on your device. To get Laser Beam Pro you will be needed 5.0 and up. The content ratings of this app are USK: All ages because this app is developed by http://www.cremotech.co.kr/. Now, take a look on the installation process of the Laser Beam Pro on your Mac with Bluestacks software.
Step 01: Pick up the Bluestacks website for installing the Laser Beam Pro on your Mac device.
Step 02:After selecting the Bluestacks to download on your Mac device for running the Laser Beam Pro, install it with an email ID.
Step 03:When the full process of setting up the Bluestacks is done, now you can search for the Laser Beam Pro on the main page of the Bluestacks.
Step 04:On the search bar of the Bluestacks, write the Laser Beam Pro and press enter.
Step 05:The Laser Beam Pro will be displayed on your screen which is holding 40 total ratings on the app store.
Step 06:Open the Laser Beam Pro from the store and press the install button.
Step 07:The Laser Beam Pro size is only 1.6M that will take on your device, so the process will take only a few times to set up on your Mac device.
Step 08:Later, you can open theLaser Beam Pro and fill up the requirement to run the Laser Beam Pro on your device. Easy translator 15 0 0 g.
This structure will give you an overall idea to install the Laser Beam Pro with the emulator software Bluestacks on your Mac device.
| Least System Requirements | |
|---|---|
| Processor: | Intel or AMD processor or Higher |
| Operational System: | MacBook & Windows |
| RAM: | 2 GB or higher |
| HDD/SSD: | 3 GB Free (SSD Or HDD) |
| Net: | Mobile or Wifi |
If this table fulfills the requirements of installing the Laser Beam Pro with Bluestacks software, then you can proceed to the process. But, if your device already running the virtual machine such as VMWare Workstation then, you won’t be needed Bluestacks software for installing the Laser Beam Pro
After Bluestacks software, if you ask me about the potent software for using Laser Beam Pro on your Mac device, then I will suggest Nox Player. With Nox Player, your installation process of Laser Beam Pro with updated version February 5, 2018 is quick and simple. The installing system of the Laser Beam Pro with Nox Player is in below.
Before using the Nox Player on your device for running theLaser Beam Pro on Mac device, you should check out the below table.
| Minimum System Requirements | |
|---|---|
| Operating System: | Windows 7 to above & Mac |
| RAM: | 8 GB or higher |
| Processor: | Intel or AMD processor Any |
| HDD:: | Minimum 4 GB |
| Internet: | Broadband or Any Internet Connectivity |
There is a virtual machine software like Microsoft Virtual PC for running the Laser Beam Pro You can easily run the Laser Beam Pro if this software is activated. You don’t need Nox Player software to install Laser Beam Pro
MEmu emulator software is unique for the design and gives you fast service to install an android app like Laser Beam Pro. This Laser Beam Pro is holding the average rating 3.2 and developed by http://www.cremotech.co.kr/. You can follow the guidelines and install the Laser Beam Pro with this software.
To download the Laser Beam Pro on your Mac device MEmu emulator software is enough. But, if your device is using the Virtual Machine such as Oracle VirtualBox then you don’t need to use the MEmu emulator software for the installation process.
Not only the Mac device but also you can use the Laser Beam Pro for pc. You can follow the same process with the Different emulator software to install Laser Beam Pro latest version of the app on your device. To install the Laser Beam Pro for windows at first go to the website of the emulator software.
Then, find out the software you want to install for using theLaser Beam Pro on windows. Later install the software and open it by using an email ID for installing the Laser Beam Pro. When this process is done for using the Laser Beam Pro then go to the main page of the software. The main page will give you an opportunity to see the installation number of Laser Beam Pro which is 5,000+
Also you will see the current version of the Laser Beam Pro on your device with the last update date February 5, 2018. Select the Laser Beam Pro and wait for some time to install the Laser Beam Pro with the current version on your device. As the Laser Beam Pro size is small, the process won’t take longer than three minutes. When the process is done, now you can run the Laser Beam Pro by putting an email address on the app.
Maximum users ask about Laser Beam Pro and want to know the updated version of the app with overall information. So, here are some random answer for frequently asked question about theLaser Beam Pro
Yes, the Laser Beam Pro for Mac device is free. You can install and use the Laser Beam Pro with current version 1.3 on your Mac device without any hesitation.
If you use an emulator software on your Mac device, then it will be easy to install an android app like Laser Beam Pro on a Mac device. Systemdoctor 3 0 – mac optimization tool.
To install Laser Beam Pro on Mac, at first you need to install an emulator software. Can the sims 4 be played on mac. When the software installation is finished then, you can install the Laser Beam Pro that is developed by http://www.cremotech.co.kr/.
Using the best android app Laser Beam Pro for Mac is really helpful. The Laser Beam Pro with average rating on the store can give you a test of using the app that is authorized by Google Commerce Ltd. The size of theLaser Beam Pro is very small. That is why installing the Laser Beam Pro is simple and quick.
People use the android app likeLaser Beam Pro on Mac devices for easy installation and unique design. The Laser Beam Pro is uniquely designed for the users and requires only 1.6M on your device. And the best part is, you will get the updated version of the Laser Beam Pro while using it on your Mac device.
0 
Star